BXI7010-19 Joint Motor
BXI Hollow Planetary Series — Motor Specifications
Engineering Drawing
- Mounting OD: 81.00 mm
- Height: 68.00 mm
- Hollow Bore: 9 mm
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Rated Voltage | 24–58 | V |
| No-load Speed | 200 | RPM |
| Rated Output Speed | 100 | RPM |
| Rated Torque | 15 | Nm |
| Peak Torque | 48 | Nm |
| Peak Phase Current | 40 | A(rms) |
| Gear Ratio | 19.5 | — |
| Moment of Inertia | 0.0137351 | kg·m² |
| Weight | 0.8 | kg |
Note: All parameters above are theoretical values and may vary under actual operating conditions.
Interface & Sensor Definitions
| Item | Specification |
|---|---|
| Communication | CAN / CANFD |
| Protocol | MIT Protocol Compatible |
| Control Mode | Mixed Torque / Velocity / Position |
| Bearing Type | Cross Roller Bearing |
| Dual Absolute Encoder | Supported |
| Input Encoder | Magnetic Encoder (16-bit) |
| Output Encoder | Inductive Encoder |
Performance Curves
Torque–Current Curve
Test conditions: Voltage 57 V; Speed 50 RPM
Torque–Speed Curve
Test conditions: Voltage 57 V
Specifications may be updated or revised. For more information, visit www.bxirobotics.cn or contact contact@bxirobotics.com.